Disaster area DMC-6D

Did you read the instructions for the disaster area? I found the manual to be quite straightforward. I'm using a dmc 3xl gen 2 to control my h9 and a strymon möbius (pass through) . Make sure everything is on their proper midi channels!!

DMC-6D with the universal firmware only send 2 CCs per channel on the expander port (you need to buy/build a 2-way footswitch to make it happen though).

On looper mode, I think it only sends midi note numbers.

On scrolling and presets modes it sends Program Changes.

Unfortunately, I couldn’t get the best of it with my Eventide boxes due to its limitations, it works well with the Strymon Timeline though.

I would rather get a Programmable MIDI controller instead or you might want to ask those guys to make a custom firmware where you can send some CCs.

BTW, What a great update on the whole website! Congratulations to the web devs.

lol I forgot this.

If you just want to send PC (Program Changes) you only need to make sure to have both devices (H9 and your amp) are on different MIDI channels and the first one in your chain need to be on MIDI THRU.