Securing H9 to pedal board

This topic is empty.

Viewing 3 reply threads

Author

Posts
- June 30, 2015 at 11:51 pm #112656
  
  kevin_jazz
  Member
  
  This is a silly question: how do I secure the H9 to my pedal board? Stated another way, is there a safe way to remove the little feet from the H9? For my other pedals, I just put velcro on the back. But the H9 clears the pedal board and so the velcro doesn’t come in contact with the velcro on the board.
  
  How do you guys do it?
  
  Thanks, Kevin
- July 1, 2015 at 3:31 am #139514
  
  austmann
  Participant
  
  I didnt remove the little feets i taped 2 stripes of velcro over the whole surface.it sits quite well on pedaltrain mini surface and never had to adjust it.
- July 1, 2015 at 4:42 am #139515
  
  Motozee
  Member
  
  Hi Kevin,
  
  Basically you just have to peel the little rubber feet off. They are on there with an adhesive back. If need be you can take a credit card or other hard plastic and slowly work it underneath them (and it won’t scratch the H9). It takes a little effort but they come off just fine and then you can velcro away!! Hope this helps.
  
  Zach.
- July 2, 2015 at 1:22 pm #139539
  
  stormshredder
  Member
  
  Plus, you can get little rubber feet at any hardware store or department. Don’t worry about taking them off. I keep all mine attached to a little plastic card just in case I need to put them back on. Either way, they’re cheap.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.