Output Lvl Level Switch is Broken and is stuck on Line

Tagged: output lvl level switch broken stuck

This topic is empty.

Viewing 3 reply threads

Author

Posts
- August 27, 2015 at 9:53 pm #112802
  
  Cmor
  Member
  
  Hello, I’ve been loving my pitchfactor after i bought it about two months ago. Two days ago I was setting up for a rehearsal and noticed that the Output Level switch had been flipped to line, so I went to switch it back to amp . . and It was stuck.. Not that it won’t move, it just won’t make the actual “switch”
  
  I’m wonderinig if anyone has experienced one of these switches wearing out or ceasing to function properly . . and what they did to get it taken care of. Take it to some one who works on pedals in town? (I live in Denver, CO). Is it an Easy fix for some one who knows what they’re doing? I’d prefer not to be without the Pitchfactor for a long time because I use it regularly for gigs.
  
  Thanks!
- August 27, 2015 at 9:55 pm #140322
  
  nickrose
  Moderator
  Eventide Staff
  
  We've not had much trouble with these, but obviously they are not unbreakable.
  
  A reasonably competent tech should be able to replace the switch, or wired it fixed to either position.
- August 27, 2015 at 9:56 pm #140323
  
  spaceJam
  Member
  
  I think it will be an easy fix for someone who knows how to desolder.
  
  Just make sure to get the right part and visit your local electronic store.
- March 23, 2018 at 5:09 pm #148768
  
  Jinsai
  Participant
  
  I just had both of these switches fail on my TimeFactor AND ModFactor. These are devices that don’t leave my studio, and the switches have been flipped MAYBE 10 times total.
  
  This is really disturbing and disappointing. I will get RMAs for both, and I am hoping this will be covered under warranty.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.