Space Pedal: Disabled Knob Functionality

Tagged: space pedal

This topic is empty.

Viewing 5 reply threads

Author

Posts
- September 17, 2015 at 5:49 pm #112857
  
  JSlimm
  Participant
  
  Hi all!
  
  I somehow created a way to scroll through parameters using the X Knob only and adjusting each parameter individually using the Encoder. I need a solution to disable this and restore the use of all 11 knobs again. Tried restoring factory settings and couldn’t correct this.
  
  Thanks for your assistance!
  
  J
- September 17, 2015 at 6:37 pm #140606
  
  wedelich
  Moderator
  Eventide Staff
  
  Jslimm wrote:
  
  Hi all!
  
  I somehow created a way to scroll through parameters using the X Knob only and adjusting each parameter individually using the Encoder. I need a solution to disable this and restore the use of all 11 knobs again. Tried restoring factory settings and couldn't correct this.
  
  Thanks for your assistance!
  
  J
  
  If you press and hold X, Y, or Z it will toggle that button from Simple to Expert mode. Expert mode lets you scroll through all the parameters with an X, Y, or Z button.
- September 17, 2015 at 7:14 pm #140607
  
  spaceJam
  Member
  
  Space doesn’t have a Z knob.
  
  I think you are talking about the H9 and OP is talking about the Space.
  - September 18, 2015 at 1:09 am #140609
    
    wedelich
    Moderator
    Eventide Staff
    
    spaceJam wrote:
    
    Space doesn't have a Z knob.
    
    I think you are talking about the H9 and OP is talking about the Space.
    
    Oops, you're right! Brain glitch! Ok, OP, can you perhaps provide a little more detail, or even a video of this behavior? Becuase if it is indeed a Space pedal, this is pretty strange from the way it reads, never heard of anything like this before.
    
    Also, make sure the Knob Mode (in the System Menu under Utilities) isn't set to Catchup or Locked.
- September 22, 2015 at 1:26 pm #140682
  
  JSlimm
  Participant
  
  Thanks so much, all! Got it all sorted 🙂
- March 27, 2016 at 7:14 pm #143003
  
  JSlimm
  Participant
  
  Hi,
  
  Reopening this thread as this is now happening again. I can’t seem to get out of this mode causing this issue which is disabling all knobs but the preset/encoder knob.
  
  I’m currently in Preset Mode. Suggestions?
  
  Thanks!
  
  Jac
- March 27, 2016 at 7:39 pm #143004
  
  JSlimm
  Participant
  
  I’m able to edit the preset paramets with all knobs when using the H9 Control software. It just will not work when actually using the physical knobs on the stompbox.
Author

Posts

Viewing 5 reply threads

You must be logged in to reply to this topic.