Two H9's and one Aux Switch for changing presets

This topic is empty.

Viewing 2 reply threads

Author

Posts
- January 13, 2016 at 11:38 pm #113163
  
  aftrshok99
  Member
  
  I’m going to be running two H9’s and was wondering if you can use one aux switch to make both h9’s change presets simultaneously? I know you can control tap tempo on both H9’s from one aux switch by hooking up a midi cable between the two H9’s and then setting master / slave, etc but not sure about presets (up / down). I would assume you could do the same for preset switching
- January 17, 2016 at 10:34 pm #142177
  
  JES
  Participant
  
  aftrshok99 wrote:
  
  I’m going to be running two H9’s and was wondering if you can use one aux switch to make both h9’s change presets simultaneously? I know you can control tap tempo on both H9’s from one aux switch by hooking up a midi cable between the two H9’s and then setting master / slave, etc but not sure about presets (up / down). I would assume you could do the same for preset switching
  
  I don’t know about aux switches, but you can control one H9 with another via MIDI, so you could “pair” presets via MIDI messages.
- January 17, 2016 at 11:02 pm #142178
  
  nickrose
  Moderator
  Eventide Staff
  
  You can connect one aux switch to two H9's by using a suitable Y-lead, as long as you avoid ground loops.
  - September 15, 2019 at 5:00 pm #152722
    
    pedroandresgomez
    Participant
    
    nickrose wrote:
    
    You can connect one aux switch to two H9’s by using a suitable Y-lead, as long as you avoid ground loops.
    
    IF I DID THAT, WITH THAT AUX SWITCH AND TWO H9, COULD I HAVE THE DELAY TRAILS WORKING GOOD ?
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.

Two H9’s and one Aux Switch for changing presets