H9 Quadravox and Diatonic Pitch Problem

Tagged: eventide h9, QuadraVox

This topic is empty.

Viewing 3 reply threads

Author

Posts
- March 25, 2016 at 3:21 pm #113361
  
  wdunning
  Member
  
  Hi, I recently bought an H9 Core and have installed the Diatonic and Quadrovox algorithms.
  
  Pitch A in Diatonic and Pitches A & B in Quadravox are currently making no sound. This is regardless of the preset I use, the balance between the pitches I set or any other setting. Pitches C/C+D are working correctly.
  
  I have tried changing most of the pedal settings and everything else I can think of. Is there a fault with my pedal or am I missing something?
- March 25, 2016 at 5:56 pm #142980
  
  Bodde
  Participant
  
  My guess is that you have set pitch A and B to OFF (al the way to the left) in the Quadravox. And Pitch A mix in the Diatonic algo to A0+B10. Otherwise I can’t find any logical explanation.
  - March 25, 2016 at 8:40 pm #142986
    
    wdunning
    Member
    
    bodde wrote:
    
    My guess is that you have set pitch A and B to OFF (al the way to the left) in the Quadravox. And Pitch A mix in the Diatonic algo to A0+B10. Otherwise I can’t find any logical explanation.
    
    Nope, I’ve tried changing the mix. If I put it over to the A side and set mix to 100% it just makes no sound at all…
- March 25, 2016 at 10:09 pm #142988
  
  voodoojeff
  Participant
  
  just a shot in the dark, but check the internal routing settings. If it`s somehow on wet/dry you may sending that signal to the side of the H9 that isn`t plugged in (assuming you`re only using one of the outputs).
  - March 26, 2016 at 12:28 am #142990
    
    wdunning
    Member
    
    voodoojeff wrote:
    
    just a shot in the dark, but check the internal routing settings. If it`s somehow on wet/dry you may sending that signal to the side of the H9 that isn`t plugged in (assuming you`re only using one of the outputs).
    
    Nope, tried it… So I’m guessing the pedals a goner?
- March 28, 2016 at 6:19 pm #143025
  
  wedelich
  Moderator
  Eventide Staff
  
  wdunning wrote:
  
  Hi, I recently bought an H9 Core and have installed the Diatonic and Quadrovox algorithms. Pitch A in Diatonic and Pitches A & B in Quadravox are currently making no sound. This is regardless of the preset I use, the balance between the pitches I set or any other setting. Pitches C/C+D are working correctly. I have tried changing most of the pedal settings and everything else I can think of. Is there a fault with my pedal or am I missing something?
  
  How is the pedal hooked up (physical cable wise)? mono in mono out? mono in stereo out? stereo in stereo out? etc. In any mono in case, if you accidentally plugged in input 2 instead of input 1 this exact situation would happen with those algorithms. Have you double checked your setup?
  - August 7, 2020 at 6:32 pm #155502
    
    MrXpi
    Participant
    
    wedelich wrote:
    
    wdunning wrote:
    
    Hi, I recently bought an H9 Core and have installed the Diatonic and Quadrovox algorithms. Pitch A in Diatonic and Pitches A & B in Quadravox are currently making no sound. This is regardless of the preset I use, the balance between the pitches I set or any other setting. Pitches C/C+D are working correctly. I have tried changing most of the pedal settings and everything else I can think of. Is there a fault with my pedal or am I missing something?
    
    How is the pedal hooked up (physical cable wise)? mono in mono out? mono in stereo out? stereo in stereo out? etc. In any mono in case, if you accidentally plugged in input 2 instead of input 1 this exact situation would happen with those algorithms. Have you double checked your setup?
    
    I’m having the same problem here. mono IN and stereo OUT. @wedelich can you help ??
- August 7, 2020 at 6:46 pm #155504
  
  bohan
  Moderator
  Eventide Staff
  
  MrXpi wrote:
  
  I'm having the same problem here. mono IN and stereo OUT. @wedelich can you help ??
  
  Make sure the Pitch Mix is set to the middle (A10+B10). Otherwise, if this happens on all presets in all pitch algorithms, you may want to reinstall the latest firmware and factory reset your H9.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.