Stereo out to TRS input possible?

This topic is empty.

Viewing 4 reply threads

Author

Posts
- June 27, 2016 at 3:20 pm #113535
  
  adistom
  Member
  
  Hi!
  
  I have a concern and need to be sure it’s feasible :
  
  I have a timefactor and use stereo outputs. Is it possible and safe to use a double TS cable from left and right output merged to TRS?
  
  I have a device that accept stereo but only using a TRS input
  
  Thanks a lot for your answers / advices
  
  Cheers!
- June 27, 2016 at 3:25 pm #143679
  
  nickrose
  Moderator
  Eventide Staff
  
  It should be OK, as long as you connect one output to T and the other to R (meaning – don't short them together).
- June 27, 2016 at 3:52 pm #143681
  
  adistom
  Member
  
  What do you mean by short?
  
  the left timefactor output will be connected to T, the right timefactor output will be connected to R and the other end of the cable (TRS) will be connected to the stereo TRS input of another device. Does this seem good? i see no short here except the common ground (i was mainly concerned about that beceause T and R are not connected together)
- June 28, 2016 at 2:55 pm #143700
  
  nickrose
  Moderator
  Eventide Staff
  
  I meant "short circuit." It's OK to tie the grounds together.
- June 28, 2016 at 3:52 pm #143702
  
  adistom
  Member
  
  Ok, i was pretty sure but needed to be 100% 😉 Thanks a lot NickRose i’ll test that
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.