Midi to control pre/post signal routing?

Home Forums Products Stompboxes Midi to control pre/post signal routing?

  • This topic is empty.
Viewing 4 reply threads
  • Author
    Posts
    • #113562
      gboland
      Member

      The manual says I have to set pre and post in each preset.  is it possible to change this with Midi?  i.e. if using a preset can I send a midi message to change the pre/post setting without changing the preset?

       

       

    • #143810
      nickrose
      Moderator
      Eventide Staff
      gboland wrote:

      The manual says I have to set pre and post in each preset.  is it possible to change this with Midi?  i.e. if using a preset can I send a midi message to change the pre/post setting without changing the preset?

      Sorry – not at present. The routing is a feature of the preset.

       

      • #145966
        Ryan Harris
        Participant
        nickrose wrote:

        gboland wrote:

        The manual says I have to set pre and post in each preset.  is it possible to change this with Midi?  i.e. if using a preset can I send a midi message to change the pre/post setting without changing the preset?

        Sorry – not at present. The routing is a feature of the preset.

        I have all of the factor pedals (plus an additional timefactor) and use them on a table in a live setting. I would like to also be able to toggle the preset between pre and post via MIDI because it is cumbersome to do so manually on-the-fly. Per the manual:

        When in PRE/POST mode, you can pick from the above options:

        1) Press and hold the Left Footswitch. The display will show the Output Level.

        2) Press the Encoder until the display shows PRE (default) or POST.

        3) Turn the Encoder to set it as desired.

        4) Release the Footswitch – the Preset will return to its previous Active or Bypassed state.

        5) Remember to save the preset, or the change will be lost.

        I think a CC would be the best way to do this. It wouldn’t impact the current functionality because the preset could still store the initial routing value. Could you possibly discuss with a developer to have it added to the feature request list?

        Thanks!

    • #145039
      Jop vS
      Participant

      That’s a pity, would be great for my setup as well.

    • #145970
      spaceJam
      Member

      Yeah, it would be nice to have that (and a lot more) parameter in the CC table.

       

      As a workaround, just duplicate your preset, one with pre and the other one with post.

      • #145973
        Ryan Harris
        Participant
        spaceJam wrote:

        As a workaround, just duplicate your preset, one with pre and the other one with post.

        Great idea. Thanks for the tip!

    • #145984
      Adamixoye
      Participant

      MIDI control for this and the input source (guitar/bass/synth) are the two MIDI features I’d really like to see implemented.

      • #145985
        Ryan Harris
        Participant
        Adamixoye wrote:

        MIDI control for this and the input source (guitar/bass/synth) are the two MIDI features I’d really like to see implemented.

        I’m using pre.post in a rather unconventional way. I’m running a guitar through the pre i/o and a synth through the post i/o. Being able to switch the input source and the routing at the same time would be awesome.

Viewing 4 reply threads
  • You must be logged in to reply to this topic.