H9 Bypass options

Home › Forums › Products › Stompboxes › H9 Bypass options

  • This topic is empty.
Viewing 2 reply threads
  • Author
    Posts
    • July 14, 2016 at 10:30 pm #113566
      mikeller
      Participant

      Trying to understand optium bypass settings for my H9

       

      Right now everything is default  (DSP and Kill Dry Disabled) I think….

       

      I use my H9 in my amps effects loop with two other pedals (a Boss DD-500 in buffered mode with tails I guess) and a clean boost pedal.  That said is the settings stated above the best or should Kill Dry be enabled?

       

      Thanks!!!

      Mike

    • July 15, 2016 at 1:15 pm #143837
      nickrose
      Moderator
      Eventide Staff

      It partly depends on whether you have a serial or parallel effects loop.

      If the former, you should have killdry off.

      If the latter and only one pedal you should have killdry on. If more than one pedal, you can't use killdry as it will mute when bypassed, but if all pedals are bypassed you will double the volume – parallel loops don't work well with multiple pedals.

       

    • July 15, 2016 at 1:59 pm #143839
      mikeller
      Participant

      Thank you – yeah the Mesa’s are Serial loop and i am assuming my Supersonic is as well.  So it looks like I have the best options set.  Thank you for your help!!!!

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.