Any idea how I’d do a pre-post route in stereo? (H9)

Home › Forums › Products › Stompboxes › Any idea how I’d do a pre-post route in stereo? (H9)

Tagged: , ,

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • July 19, 2016 at 7:17 pm #113580
      lordradish
      Participant

      Hi, folks…

      First off, let me say I know I can’t do this using the built in pre-post function on the H9. But I’ve recently made some upgrades to my pedalboard, with the latter half all being stereo. I’ve been using the pre-post on the h9 with great success. Basically I have the route set up so it goes either before or after my Strymon Mobius, Dig, and El Capistan.

      Is there some sort of pedal out there where I can do the same thing, in stereo? Basically, with a click of the switch, move the H9 to the front or back of the Strymons?

      Thanks.

    • July 20, 2016 at 4:00 pm #143878
      gkellum
      Participant

      I think that's one of the things that the Gigrig G2 does:

      http://www.thegigrig.com/g2-c2x17827986

      I've never used on of those though, and I don't know the product at all well.  So, take what I say with a grain of salt.

      • July 20, 2016 at 4:01 pm #143879
        lordradish
        Participant

        It does. And it’s way more than I need and real expensive, too.  Thanks.

         

        gkellum wrote:

        I think that’s one of the things that the Gigrig G2 does:

        http://www.thegigrig.com/g2-c2x17827986

        I’ve never used on of those though, and I don’t know the product at all well.  So, take what I say with a grain of salt.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.