Modfactor Power Requirements

This topic is empty.

Viewing 1 reply thread

Author

Posts
- August 17, 2016 at 1:23 pm #113647
  
  mikeyso
  Member
  
  Hi! I’m not sure if this was asked already before, but I recently got a 2nd hand Modfactor, and I was hoping to clarify the following –
  
  1. If the item is already registered to the previous owner, how do I transfer the registration to my account?
  2. The pedal that I got l came with a 120v adapter (and I reside in the Philippines, so I have to use a transformer with it. Standard voltage here is 220v). Can I use a different PSU, 220v, enough to cover the mA requirement? (e.g. Godlyke PSU) Doing without the need for a transformer. Or can the unit that I got work only with 110v adapters?
  
  Thanks!
- August 17, 2016 at 1:28 pm #144144
  
  gkellum
  Participant
  
  mikeyso wrote:
  
  1. If the item is already registered to the previous owner, how do I transfer the registration to my account?
  
  Please send an email to support@eventide.com and send them a photo of the serial number on the back of the ModFactor. It should look something like MF-12345.
  
  mikeyso wrote:
  
  2. The pedal that I got l came with a 120v adapter (and I reside in the Philippines, so I have to use a transformer with it. Standard voltage here is 220v). Can I use a different PSU, 220v, enough to cover the mA requirement? (e.g. Godlyke PSU) Doing without the need for a transformer. Or can the unit that I got work only with 110v adapters?
  
  You can use a different power supply. We can't recommend power supplies that we haven't tested, but if you have a regulated power supply that satisfies ModFactor's power needs (9VDC, 500mA, Tip hot (+)), it should be fine.
  
  We do have different power supplies for sale as well on our online store: http://www.eventidestore.com/powersupplies1.html
  - August 21, 2016 at 3:46 pm #144161
    
    mikeyso
    Member
    
    gkellum wrote:
    
    mikeyso wrote:
    
    1. If the item is already registered to the previous owner, how do I transfer the registration to my account?
    
    Please send an email to support@eventide.com and send them a photo of the serial number on the back of the ModFactor. It should look something like MF-12345.
    
    mikeyso wrote:
    
    2. The pedal that I got l came with a 120v adapter (and I reside in the Philippines, so I have to use a transformer with it. Standard voltage here is 220v). Can I use a different PSU, 220v, enough to cover the mA requirement? (e.g. Godlyke PSU) Doing without the need for a transformer. Or can the unit that I got work only with 110v adapters?
    
    You can use a different power supply. We can’t recommend power supplies that we haven’t tested, but if you have a regulated power supply that satisfies ModFactor’s power needs (9VDC, 500mA, Tip hot (+)), it should be fine.
    
    We do have different power supplies for sale as well on our online store: http://www.eventidestore.com/powersupplies1.html
    
    Thanks so much for the reply, sir. Will send out an e-mail for the registration, and I’ll check out the power supplies available.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.