H8000FW Crashes

This topic is empty.

Viewing 3 reply threads

Author

Posts
- May 4, 2017 at 10:23 pm #114142
  
  mtclearwave
  Member
  
  I am getting the dreaded message “A bus error has occured.” (E12) The error numbers (20200040 and 2000A940 and 31690040) are displayed after I load up one of my recent custom Presets in DSP A and then switch to DSP B or visa versa. It only happens with Programs I have saved (to Card) and renamed. With all other non customized Presets it does not crash. I have tried to shorten the names to see if that helps (just using letters – no numbers or other symbols) but it still crashes. What gives?
- May 5, 2017 at 2:52 pm #146302
  
  nickrose
  Moderator
  Eventide Staff
  
  I'm guessing your card is corrupted in some way.
  
  First thing would be to reformat it and try again.
  
  If that fails, try a different card and adaptor.
  
  If that fails, send the card and adaptor to Eventide marked for my attention and we can have a look at it.
- May 5, 2017 at 3:10 pm #146304
  
  mtclearwave
  Member
  
  Ok thanks – I will do some testing and get back to you
- May 8, 2017 at 8:08 am #146328
  
  mtclearwave
  Member
  
  After lots of testing – I think the crashes had to do with Prests I had saved (and became corrupted) in an iPad app called Sysex Base and then loaded them back into the H8000. I tried to reproduce a crash with many new saved custom files (also using the Sysex Base app- and I haven’t had any more crashes since – thank God.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.