Aux switch for Restart of H9 Harpeggiator?

This topic is empty.

Viewing 4 reply threads

Author

Posts
- May 7, 2017 at 12:11 am #114146
  
  aviavi
  Participant
  
  Hi. I’m tryin got figure out whether it’s possible to assign an external non-latching footswitch to control the Restart for Harpeggiator patterns. I have a Boss FS-5U (unlatched/momentary) footswitch. It works when I assign the FS-5U to Tap Tempo in the Aux Switch Mappings. But when I assign the pedal to Performance Switch (which is I think how one might control the Restart), I get a message on the H9 of “All 3 and All 4.” With some presets, the Length parameter toggles between the range values around the Length knob.
  
  Any words of wisdom to get Restart happening? Thanks much.
- May 7, 2017 at 4:28 am #146315
  
  camn
  Participant
  
  I can confirm that my external AUX performance switch restarts the Arp on my h9.
  
  I have to think this is a setup thing.
  
  You have 1 aux switch only? And it is set to do one thing only?
  - May 7, 2017 at 4:57 pm #146319
    
    aviavi
    Participant
    
    camn wrote:
    
    I can confirm that my external AUX performance switch restarts the Arp on my h9.
    
    I have to think this is a setup thing.
    
    You have 1 aux switch only? And it is set to do one thing only?
    
    Yes, one thing only. And it’s 1 aux switch. What kind of aux switch are you using? And do you have it mapped in a particular way?
- May 7, 2017 at 11:04 pm #146321
  
  aviavi
  Participant
  
  Oh! I figured it out: I had the General Settings>Use Expression Pedal, Aux Switch or Both set to Both. Setting it to Aux Switch only made everything work like a charm.
- May 7, 2017 at 11:15 pm #146322
  
  camn
  Participant
  
  Ha. I have homemade switches :). But its a momentary normally open.
  
  Lets run through a couple things, find the problem.
  
  Tell me this- what kind of cable are you using- mono or stereo?
  
  And then lets confirm your settings:
  
  Pedal–>general settings–>UseExpPedal/Aux/Both–: Set to AUX.
  
  Pedal–>AUX Switch Mappings–: confirm your switch is assigned to “Performance Switch”.. and more importantly.. confirm it is NOT set to anything ELSE. I suspect it is ALSO assigned to “Set Parameter 9” (or 10)
  
  Check those- let us know.
  - May 7, 2017 at 11:39 pm #146323
    
    aviavi
    Participant
    
    camn wrote:
    
    And then lets confirm your settings:
    
    Pedal–>general settings–>UseExpPedal/Aux/Both–: Set to AUX.
    
    Yup, that was it! Thanks so much for your help.
- May 8, 2017 at 2:05 am #146325
  
  camn
  Participant
  
  Yay.
  
  The performance switch is the best thing ever.
Author

Posts

Viewing 4 reply threads

You must be logged in to reply to this topic.