H9 fault screaming feedback

This topic is empty.

Viewing 3 reply threads

Author

Posts
- June 26, 2017 at 2:11 pm #114242
  
  Send2george2
  Member
  
  Hi al. I’ve been using my H9 for a couple of years now without issue however recently I’ve have encountered a horrible issue that appears intermittently.
  
  I’m playing an algorithm and the box starts, what I can best describe as noisy digital feedback. All other sounds are obliterated.
  
  If I press the left button off and on it clears but it does reappear after a few minutes.
  
  Anyone encountered similar? Does this sound like a software or hardware bug?
  
  Should I try a factory reset?
  
  I had this issue before and after the pitch fuzz load so that makes me think more like a hardware fail..
  
  Any ideas?
- June 26, 2017 at 3:42 pm #146700
  
  nickrose
  Moderator
  Eventide Staff
  
  My guess is you have some kind of feedback loop in your connections. Disconnect everything except for one output, and see if it changes.
- June 26, 2017 at 4:01 pm #146701
  
  Send2george2
  Member
  
  I do have the h9 set with both outputs. I’ll try removing one and seeing if I can replicate it. It might take a while. Thanks for the thought.
  - June 26, 2017 at 4:28 pm #146703
    
    nickrose
    Moderator
    Eventide Staff
    
    send2george2 wrote:
    
    I do have the h9 set with both outputs. I'll try removing one and seeing if I can replicate it. It might take a while. Thanks for the thought.
    
    Not just outputs. Disconnect inputs (temporarily) as well. OK to plug a guitar in, but nothing else.
- June 30, 2017 at 5:52 pm #146734
  
  jnorris
  Participant
  
  I am experiencing this, as well. I can make this happen by engaging the H9 in any order (pre/post) as long as my JHS Angry Charlie overdrive is on and solo boost. I am not using much drive, running close to 12 o’clock so it should be fine.
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.