independent recording for Sample 1 and Sample 2 H8000FW Preset 5224

Home › Forums › Products › Rackmount › independent recording for Sample 1 and Sample 2 H8000FW Preset 5224

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • January 9, 2018 at 4:45 pm #114537
      mtclearwave
      Member

      When I rec on Sample 1 – it records to Sample 2 at the same time. I want to sample different samples for Sample 1 d 2 – and play them both back simultaneous with different start points,  pitch and speed. Is this possible? In the INFO – it says that one can independently rec or playback with the audio control 1 and 3. What exactly does the 1 and 3 outputs refer to (hardware /internal routing?)

      Thx

    • January 10, 2018 at 4:37 pm #148072
      nickrose
      Moderator
      Eventide Staff

      On looking at it, it appears that using the softkeys to record or play operates both samplers, so it records or plays all (4) channels.

      If you use the inputs 1 and 3 to perform an audio triggered record or play, you can drive the samplers independently.

      The inputs 1 and 3 refer to the inputs to the preset, after the routing. These will be DSPA_IN1 and DSPA_IN3.

      The INFO page correctly describes the operation.

      Note that the trigger EQ allows more control over the audio triggering, for example you could set it up so that a bass drum triggered the record or play.

       

       

       

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.