Eclipse Expression Pedal

This topic is empty.

Viewing 2 reply threads

Author

Posts
- May 2, 2018 at 6:53 pm #114719
  
  gregsinibaldi
  Participant
  
  Hello,
  
  I have one of these: http://this1smyne.com/shop/me-mini-expression-pedal/
  
  Its not your “normal” expression pedal. I have the 10k Mono version. I can set it up with my Eclipse just fine but I only get a very small parameter range. From 0 to 5.6, (rather than 0 to 100, I assume)
  
  Do I need to change my pedal to 25k (or higher?) to get the full sweep of motion? Or perhaps I’m not setting it up correctly? I’m using a TRS cable (I also tried it with a normal cable and got the same results)
  
  Thanks for any help!
  
  Greg
- May 3, 2018 at 2:46 pm #149130
  
  nickrose
  Moderator
  Eventide Staff
  
  The Eclipse needs a 10-25K pot with a TRS (stereo) connector and a TRS (stereo) lead.
  
  Your symptoms suggest that the R of the Eclipse socket is not connected to the pot (this is probably what they mean by Mono) – check your cables and talk to the pedal manufacturer.
  
  Using a 25K pot will help, but not fix the problem – you need a "stereo" pot and a "stereo" lead.
- May 3, 2018 at 4:40 pm #149132
  
  gregsinibaldi
  Participant
  
  Great Thanks… so the 10k or 25k doesnt really matter just that its stereo right?
  - May 3, 2018 at 6:27 pm #149136
    
    nickrose
    Moderator
    Eventide Staff
    
    gregsinibaldi wrote:
    
    Great Thanks… so the 10k or 25k doesnt really matter just that its stereo right?
    
    True on the rack-mount units. Note that the stompboxes are different.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.