Just bought a DSP4000 but screen is weird

This topic is empty.

Viewing 2 reply threads

Author

Posts
- July 19, 2018 at 11:35 am #114840
  
  Wwwwww
  Member
  
  I bought a DSP4000 a couple weeks ago. When I got it I noticed there was a line thru the screen. I figured maybe it was a problem with a display but then I noticed it is much worse when the display is inverted. Does anyone have an idea as to what could be the problem or if the problem is more likely isolated to the display?
  
  I am at a loss as to why the line is showing up And a replacement screen is not a small investment.
  
  the attached photo shows the problem I mentioned.
- July 21, 2018 at 12:40 am #149766
  
  nickrose
  Moderator
  Eventide Staff
  
  Sorry – it's probably the screen, and they are not easy to find (haven't been made for years). I suggest you discuss it with the vendor.
  - July 21, 2018 at 9:52 pm #149768
    
    Wwwwww
    Member
    
    nickrose wrote:
    
    Sorry – it's probably the screen, and they are not easy to find (haven't been made for years). I suggest you discuss it with the vendor.
    
    Thanks, I did ask them and they mentioned the screen has already been replaced once. (I don’t know if that means the current screen that’s in there?) basically I am trying to figure out if it was like a different issue inside the machine. Maybe I should make the power supply is healthy
- July 21, 2018 at 9:58 pm #149769
  
  nickrose
  Moderator
  Eventide Staff
  
  Certainly you would be wise to check power supplies and anything else you can think of. But, that aside, it's probably the display.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.