Multiple RCV Program Change Maps

This topic is empty.

Viewing 1 reply thread

Author

Posts
- November 1, 2018 at 3:29 pm #115030
  
  aonascimento
  Member
  
  Hi. I recently acquired a TimeFactor stomp due to all the control it provides to its features, and it’s really awsome indeed. However, I came across an issue that is bugging me because I could not find any answer through the web.
  
  My MIDI controller is very limited at the number of program changes it sends and I was hopping that TimeFactor allowed me to create more than one RCV Map. Eg:
  
  RCV MAP #01
  
  PC #00 -> Bypass
  
  PC #01 -> 1:1
  
  PC #02 -> 1:2
  
  PC #03 -> 2:1
  
  PC #04 -> 2:2
  
  RCV MAP #02
  
  PC #00 -> Bypass
  
  PC #01 -> 4:1
  
  PC #02 -> 4:2
  
  PC #03 -> 5:1
  
  PC #04 -> 5:2
  
  That way I could use the same program changes my controller is capable of
  
  sending to have multiple multiple presets in different contexts/bands, etc.
  
  Is that possible without the need to externally save/export the current
  
  config? In other words, is that possible changing the RCV MAP on the fly
  
  without having to connect to a pc and loading a previously saved MAP?
  
  Thanks in advance.
- November 1, 2018 at 4:56 pm #150442
  
  bohan
  Moderator
  Eventide Staff
  
  aonascimento wrote:
  
  Is that possible without the need to externally save/export the current
  
  config? In other words, is that possible changing the RCV MAP on the fly
  
  without having to connect to a pc and loading a previously saved MAP?
  
  No, you can only assign one RCV Map. But here is something you can do:
  
  PC #00 -> 1:1
  
  PC #01 -> 2:1
  
  PC #02 -> 3:1
  
  PC #03 -> 4:1
  
  PC #04 -> 5:1
  
  With footswitches on the TimeFactor, you may be able to easily switch to 10 presets.
  
  Is it possible changing the RCV MAP on the fly without connecting to a PC?
  
  Yes. You can change the MIDI PC RCV Mapping on the unit in the Settings->MIDI->RCV Map menu.
  - November 1, 2018 at 5:17 pm #150443
    
    aonascimento
    Member
    
    bohan wrote:
    
    No, you can only assign one RCV Map. But here is something you can do:
    
    PC #00 -> 1:1
    
    PC #01 -> 2:1
    
    PC #02 -> 3:1
    
    PC #03 -> 4:1
    
    PC #04 -> 5:1
    
    With footswitches on the TimeFactor, you may be able to easily switch to 10 presets.
    
    That was exactly what I intended to do, thanks for the suggestion by the way. The point is that this is just one MAP, and I would need a completely different MAP for another band situation (eg. play in a cover band, and play in an independent band, or with acoustic set), with the same program changes pointing to different bank:presets.
    
    That mainly is because of my controller PC number limitation.
    
    bohan wrote:
    
    Is it possible changing the RCV MAP on the fly without connecting to a PC?
    
    Yes. You can change the MIDI PC RCV Mapping on the unit in the Settings->MIDI->RCV Map menu.
    
    I meant the whole RCV MAP like MAP 01, MAP 02, MAP 03… But as you said, only one map can be assigned at a time.
    
    I suppose I’ll have to load saved maps for every different gig.
    
    Thanks for the reply.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.