Vsig for H7600 on OSX Yosemite

Home › Forums › Products › Vsig and Preset Development › Vsig for H7600 on OSX Yosemite

  • This topic is empty.
Viewing 6 reply threads
  • Author
    Posts
    • October 14, 2019 at 11:16 pm #115564
      J20056
      Participant

        What is the version that works with the H7600? Based on description of Vsig 3, it only works for H9000.

         

      • October 14, 2019 at 11:19 pm #152926
        nickrose
        Moderator
        Eventide Staff

          For the 7600 and 8000, you will need Vsig 2.x.

          I note that this has mysteriously disappeared from the Web Site – I'll see what I can do.

           

        • October 15, 2019 at 12:30 am #152927
          J20056
          Participant

            Does it work on OSX / Mac? Got rid of my PC recently. Saw there’s something called VsigX from a 3rd party so concerned there is no Eventide version?

          • October 15, 2019 at 12:23 pm #152930
            nickrose
            Moderator
            Eventide Staff

              Sorry, Vsig 2.0 is Windows only. Vsig 3.0 runs on both PC and Mac, but only supports H9000.

               

            • October 15, 2019 at 12:34 pm #152931
              J20056
              Participant

                Thanks nickrose.

                This is bad news… I guess I am in the difficult position of having a unit (H7600) that is (a) no longer supported as far as new VSig software updates and (b) doesn’t have a Mac version. I had been waiting for a long time for an easier to use version of VSig for my H7600 but obviously that it not going to happen, and I can’t even run the legacy version on a Mac. I’m afraid there is no solution. I had debated selling my H7600, so at this point, I think I am going to do that as the old VSig is just too difficult to use. I have found a replacement product that’s easier to use. I’ll lose the Harmonizer presets sadly. What is the cheapest Eventide unit that has Harmonizers for whihc you can set the scale/mode? I have presets for say C Myxolidian, so what unit does that that is cheaper? I’d buy a competing product for the main FX, but an Eventide just for the Harmonizers so that I don’t need advanced preset editing software.

                 

                 

              • November 4, 2019 at 8:33 pm #153117
                zubgub

                  Yesterday I found VsigX version 1.9 at http://www.vsigx.com and found that it works extremely well with Yosemite 10.10.5 on MBP 15″ and my H8000FW.  Quite a bit better than the VsigX on disc version 1.5 that shipped with the H8000 FW which would only work with Snow Leopard or earlier OSX.  So I don’t see any reason it wouldn’t work just as well on the H7600.

                • November 9, 2019 at 3:37 am #153155
                  J20056
                  Participant

                    I just got a H9000R which runs Vsig3. Unfortunately, it needs OSX 10.11 or higher, and my old MacPro maxes at at 10.10.

                    Running in a Win10 computer instead, no issues. 

                • Author
                  Posts
                Viewing 6 reply threads
                • You must be logged in to reply to this topic.