H9 Option for Banks Using Aux Switch

Home › Forums › Products › Stompboxes › H9 Option for Banks Using Aux Switch

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • October 30, 2019 at 3:27 pm #115589
      bnjiman
      Participant

      Hi Folks,

       

      I’ve been loving my H9 Max for the last few years, and before that my Space. 

      In terms of control, I’ve had a few midi based units all the way up to a Fractal MFC101 with 17 buttons arranged into 4 banks = 51 presets.

      I’m thinking that was overkill and maybe an old Midi Moose could work (5 butttons with 2 bank up/down switches).

      I’ve recently come across the following approach which uses three buttons very neatly. 

      Could this be implemented and mapped against a three button footswitch

      Bank size: User Definable 

      Number of banks: User Definable 

      Aux1 – Up Bank

      Aux2 – Down Bank

      Aux 3 – Increase Preset within Bank

       

      This would leave two switches on the H9 for activate etc.

       

      A possible implementation would be 

      Bank Size: 5

      Presets per Bank: 2

      This would give the user 10 presets at maxiumum of three presses away

      Personally I could scale back to five main effects (Reverb1, Reverb2, Mod, Delay, Delay2)

      with the 5 banks (Spring, Spring Trem, Room, Plate, Chorus, Univibe, Slap Delay, Digital Delay, Vintage Delay, Spacetime)

       

      Hope this could be a useful feature !!

       

      Cheers 

       

      Ben

       

       

    • October 31, 2019 at 7:27 pm #153101
      bohan
      Moderator
      Eventide Staff
      You should be able to set up your Fractal MFC101 or Midi Moose in a way that certain banks and presets send certain PC numbers, which can recall presets on H9 accordingly. Then what you need to do is only to put those algorithms/presets in your H9 in an order as you wish.

    • November 3, 2019 at 7:45 am #153109
      bnjiman
      Participant
      bohan wrote:
      You should be able to set up your Fractal MFC101 or Midi Moose in a way that certain banks and presets send certain PC numbers, which can recall presets on H9 accordingly. Then what you need to do is only to put those algorithms/presets in your H9 in an order as you wish.

      Thanks for the reply. Yes this is possible however I don’t have the controllers at present. Hoping similar functionality could be achieved using a three way aux switch if the h9 could be programmed to support preset grouping.

      Cheers
      Ben

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.