address error (E12)

This topic is empty.

Viewing 2 reply threads

Author

Posts
- January 6, 2020 at 6:55 pm #115688
  
  USed EQuipment
  Member
  
  Hi everyone.
  
  Does anybody know what this message that I’ve got from my Orville, while working with a routing configuration on it, mean:
  
  ” address error occured (E12)
  
  program: 054C30
  
  data: 0000F1 “
  
  I’ve got it only once, but I could not find any info about it. Orville behaves normally so far.
  
  Thanks in advance
- January 7, 2020 at 12:48 pm #153681
  
  nickrose
  Moderator
  Eventide Staff
  
  It's probably a hardware issue of some kind. Make sure the unit does not get too hot and that you have good power.
- January 8, 2020 at 1:12 am #153695
  
  nickrose
  Moderator
  Eventide Staff
  
  Hopefully it will not happen again.
  
  But, it is 20 years old …
- January 7, 2020 at 1:33 pm #153682
  
  USed EQuipment
  Member
  
  nickrose wrote:
  
  It’s probably a hardware issue of some kind. Make sure the unit does not get too hot and that you have good power.
  
  Hi. Thanks for the response. No, it wasn’t overheating issue or lack of power. Plugged into well-grounded surge protector, and only operated about 20 minutes since power-on. It has never happened since though. Strange.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.