Timefactor noisy / any idea?

This topic is empty.

Viewing 3 reply threads

Author

Posts
- January 29, 2021 at 4:58 pm #116323
  npx
  Good Morning from Germany,
  
  I connected my Timefactor via mono-/unbalanced jacks to my mixer. I use also other stuff like an MX-200 -> the Timefactor is compared to the other devices very (!) noisy. I tried also another power connection -> no improvement; still noisy (like white noise).
  
  Should I try some stereo / balanced cable? As far as I know, the output and input connectors from the Timefactor are unbalanced. Any other idea? Did you make some similar experiences and what did you do to avoid the “white noise”? Again, other delays and effects are quit…..
  
  Thanks for your help!
  
  Best regards and stay healthy in these strange times!
  
  Norbert
- January 29, 2021 at 8:47 pm #156981
  bohan
  Moderator
  Eventide Staff
  Where are the Guitar/Line level toggles at? Does it make a difference if you switch them to Line?
- January 30, 2021 at 6:55 am #156983
  npx
  I use the Timefactor with Synthesizers -> both switches are switched to line. There is a difference if I change this, but more or less only the frequency of the “white noise” is changing.
  
  So you do not have any noise problems with your Timefactor?
  
  Best regards
  
  Norbert
- January 30, 2021 at 1:33 pm #156986
  npx
  I use the Timefactor with some synthesizers. Both switches are at position “line”. If I switch to another position, the noise still exists, but the frequency changes a little bit. Does Eventide recommend balanced cables?
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.