After entering System mode, turn the Encoder to select
[UTILITY], then press the Encoder to

enter the Utility functions settings mode. Turn the
Encoder to scroll through the following

Utility functions. Press the Encoder
to select and set:

[BANKS] – Select
the range of Active Preset Banks (1 – 50)

Press the Encoder to select. Press the Left Footswitch to
select the lower limit and the Right

Footswitch to select the higher limit. Turn Encoder to
set the lowest and the highest active

banks. Only Presets saved in active Banks are available
for loading using the Footswitches. All

Presets may still be loaded using MIDI
program change.