Is the Mission SP-H9 expression pedal compatible with H9000?

Home › Forums › Products › Rackmount › Is the Mission SP-H9 expression pedal compatible with H9000?

Viewing 4 reply threads
  • Author
    Posts
    • January 24, 2022 at 3:43 pm #161798
      andylama
      Participant

      I have a Mission SP-H9 pedal:
      https://missionengineering.com/shop-2/products/expression/specific-use-exp/sp-h9/

      This was designed particularly for the H9 and has an integrated switch and LED indicator.
      (not sure I fully understand how all that works with a single TRS cable connection, but ok)

      Can anyone tell me if this pedal would also work with my H9000?

      Ultimately, I want a solid, simple expression pedal for my H9K, but the earlier threads here all seem to lead to some large and expensive guitar pedalboard type solutions.
      Since I already possess this Mission H9 pedal, I was hoping to simply repurpose it, but didn’t want to risk damaging anything by plugging it in to a device where compatibility wasn’t specifically declared.

      Thanks!

    • January 24, 2022 at 5:28 pm #161818
      tbskoglund
      Moderator
      Eventide Staff

      Hello,

      Yes, this expression pedal should work fine with the H9000, it certainly won’t damage anything. If you’re using a TRS cable and set the pedal mode to “expression pedal/1 aux switch”, that should allow you to use both the expression pedal and built-in switch. More info about pedal setup and calibration with the H9000 can be found here: https://cdn.eventideaudio.com/manuals/h9000/content/setup/h9000setup.html#pedals

      Let me know how it goes.

    • October 21, 2022 at 12:09 pm #166024
      formants
      Participant

      Hello,

      I am wanted to use a Roland EV-5 Food Pedal with my H9000. Also this pedal (I was trying out other typs too) seems to have “calibration problems” I wasn`t using any pedal until now because I never got it running but now I think I give it another try.

      The problem is that the values around 0 and 100 are not translated smoothly. So sometimes I have a value 4 when my pedal ist closed.

      It does not matter if I change direction of the pedal ( closed means open and open means closed)

      It would be nice to have padels that work without jumps in their values and really reüresent 0 to 100.

       

      The Link from the post above does not work anymore…

      Thank u for you attention!

      Philipp

       

      • October 21, 2022 at 1:22 pm #166025
        tbskoglund
        Moderator
        Eventide Staff

        I’ve just repaired the link in the above comment. I will test out your issue with an EV-5 pedal and get back to you.

    • October 21, 2022 at 1:28 pm #166026
      formants
      Participant

      Great! I am looking forward!!!

    • May 6, 2023 at 7:17 am #171058
      alishakihn
      Participant
      tbskoglund wrote:

      I’ve just repaired the link in the above comment. I will test out your issue with an EV-5 pedal and get back to you.

        

      I am also facing the same problem. Is there any way to solve it?

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.