Insert(s) in Dual Mode?

This topic has 1 reply, 2 voices, and was last updated 1 year, 10 months ago by joecozzi
Eventide Staff
.

Viewing 1 reply thread

Author

Posts
- February 13, 2023 at 8:52 am #169066
  
  jlane0710
  Participant
  
  I know it is not possible at the time but wondered if it might become possible in a future update?
  
  If dual mode uses mono on Path 1, there would still be room for one mono insert there.
  
  If using mono on Path 1 and Path 2, of course there could be two….
  
  Perhaps there is a complication that I am not seeing….
  
  It also seems like the user could achieve this capability in Insert mode by treating the pre-amp in the amplifier as one “insert” and still have room for one more. But with this method the user would have to be very careful with the routing options.
- February 13, 2023 at 10:30 am #169070
  
  joecozzi
  Moderator
  Eventide Staff
  
  jlane0710 wrote:
  
  Perhaps there is a complication that I am not seeing….
  
  There is no way to force the algorithms to function in mono. The architecture relies on which cables are connected to the outputs in order to determine whether the effects function in mono or stereo.
  
  jlane0710 wrote:
  
  It also seems like the user could achieve this capability in Insert mode by treating the pre-amp in the amplifier as one “insert” and still have room for one more. But with this method the user would have to be very careful with the routing options.
  
  That is correct. Insert Mode also allows for pre/post mode operation and also gives a user an extra insert to play with. The danger lies in making sure you don’t accidentally close the entire loop by bypassing an insert, but it otherwise works well.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.