Tap Tempo switch for “Fast/Slow” rotary speed control?

Home › Forums › Products › Stompboxes › Tap Tempo switch for “Fast/Slow” rotary speed control?

Tagged: 

Viewing 3 reply threads
  • Author
    Posts
    • February 13, 2023 at 10:20 pm #169092
      Jbpenne
      Participant

      Is it possible to assign the Tap Tempo switch to control Fast/Slow speed control found on Rotary, Phase presets, etc.? If so, how is it done???

    • February 14, 2023 at 1:08 pm #169103
      tbskoglund
      Moderator
      Eventide Staff

      Yes, these are called Performance Parameters and are available to assign to the footswitches in Perform Mode. If your Rotary Preset is loaded on Preset A, press the Perform button to enter Perform mode, and press the A LED to cycle through the Performance Parameters until you find the Speed parameter.

      https://cdn.eventideaudio.com/manuals/h90/1.3.0/content/play-modes/perform.html#performance-parameters

    • February 16, 2023 at 4:03 pm #169200
      Jbpenne
      Participant

      I can’t find anything regarding a “performance knob” on my H-9. How do I access it?

      Thanks’

    • February 16, 2023 at 4:08 pm #169201
      brock
      Participant

      I had a feeling you might’ve been referencing an H9 in your original post, but you didn’t specify.  No, it is not possible.  You will need to access those parameters with an Aux switch, over MIDI, or from H9 Control.

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.