H9000 Thru preset question

Home › Forums › Products › Rackmount › H9000 Thru preset question

Viewing 3 reply threads
  • Author
    Posts
    • March 5, 2023 at 10:02 pm #169575
      OsedEsahc
      Participant

      In the manual it says the “thru” preset is an “electronic” connection between the input and output. Does that mean there’s no A/D D/A conversion happening? Almost like a true bypass?

    • March 6, 2023 at 12:09 am #169576
      joeydego
      Participant

      If your IO is digital, then the only conversion is coming back out of your interface to however you’re monitoring. If your IO is analog, then that portion of the signal chain will obviously be converted.

    • March 6, 2023 at 9:25 am #169579
      tbskoglund
      Moderator
      Eventide Staff

      Yes, joeydego is correct here.

      Keep in mind that any algorithm in the FX Chain will introduce a small amount of latency. Any time I use a Thru algorithm it’s usually to troubleshoot my routing and make sure audio is passing.

      If you’d like to route your input to your outputs with no effects processing, you can use Direct I/O routing – https://cdn.eventideaudio.com/manuals/h9000/2.0/content/emote/views/directIO_view.html

      Direct I/O routing allows you to use your H9000 as a digital patchbay while still have access to all 4 FX Chains.

    • March 6, 2023 at 11:31 am #169583
      OsedEsahc
      Participant

      Excellent! Thanks so much for the help!

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.