H90 Feature request – select output from stereo to mono

Home › Forums › Products › Stompboxes › H90 Feature request – select output from stereo to mono

Viewing 3 reply threads
  • Author
    Posts
    • April 20, 2023 at 2:04 am #170551
      keir
      Participant

      <span style=”font-size: inherit;”>As the jacks on the rear are really close together it is quite difficult to add another cable if you decide you want to use a mono setup and stereo  </span>

      For example I was planning on using stereo on my practice amp at home but mono when I rehearse with my band.

      Would it be possible to have a global option in the menu to output in mono or stereo so you could either switch off output 2 when not on use or have the H90 send out dual mono to outputs 1 & 2.

      This would really help with pedalboards that are tightly packed and allow the H90 to be easily used on the front row of a board.

      Hope that makes sense. Thanks

    • April 21, 2023 at 7:56 pm #170578
      nico___
      Participant

      up for this feature!

    • July 5, 2024 at 1:26 pm #183596
      DanHop
      Participant

      Second this. I thought it was standard and was very surprised that I had to pull a cable out of output 2 to make the change between stereo and mono. It is just weird knowing that there is a mechanism in the software that switches Stereo to Mono when I pull cables, but there is no option to trigger it in the menu.

    • July 5, 2024 at 4:41 pm #183600
      tbskoglund
      Moderator
      Eventide Staff

      The “force mono” feature was added to the 1.8.6 software which allows you use the pedal in mono regardless of the input/output jacks connected.

      More information can be found here: https://cdn.eventideaudio.com/manuals/h90/1.8.6/content/system-menu/io.html

      Let me know if you have any questions.

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.