I’m having an issue where the H() is not maintaining a stereo image from preset A to B in series.
I’m running the H90 in Dual Routing Pre/Post mode, with a guitar preamp/cab sim, into a stereo pair of mixer line inputs. Input/Outputs are as follows:
In 1 – Guitar
In 3 – Preamp Out
Out 1 – Preamp In
Out 3/4 – Mixer Stereo Line In
When running this way, with Preset A in series with preset B on Path 2, preset B is only taking the left side information from preset A, and collapsing it to mono before processing it.
I have noticed that if I run a stereo output from my preamp to In 3 and 4, that the problem goes away; the stereo information is retained. This is a problem, as not all of my preamps have stereo pairs of outputs. I should be able to send a mono signal into path 2, have A split to stereo, and have B process that stereo information in series.
Please let me know if there is any other info I can provide, or if I am simply in error.
Thanks for any assistance you can provide.
