Need Help

Looks like you’re not using amps?

I’d place the MP between the Timeline and Big Sky.

Start with the first preset (H3000 MicroPitch), turn the mix knob to 12:00 (it’s on 100% wet from the factory) and go from there.

The input of the MP is stereo, but you need an insert cable or a TRS to dual TS adapter to use it. Also set the switch on the back to Stereo.

Watch this video for more details:

This is the adapter I was referring to:

https://www.amazon.com/dp/B000068O54/?coliid=I177LM8VRO6GU1&colid=11K2IX8XR6QWW&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it

FedboyBalaBala wrote:

And why between? Is it mod pedal have to be in before delay and reverb??

This is just my personal preference. I really like the tone of a stereo delay into the Micropitchshift sound, but you should experiment with the position of the MP in the chain and see what you like best. there are no rules here.

FedboyBalaBala wrote:

Or should i take out the timeline since MP has delay too??

While the MP has a very nice delay, it is obviously not as versatile as the Timeline. if you need all the options the Timeline has to offer (analog, tape, looper, etc.) you might want to keep both.

FedboyBalaBala wrote:

So i just need a trs cable??

If you want to use the stereo input of the MP, you’d need an insert cable or the adapter I mentioned earlier.
Watch the video I posted above, it shows in detail how to connect everything.

According to the spec sheet, the MP requires 9V DC @ 300mA.

I’m not familiar with the DC7, but if you have a 9V DC outlet that supplies at least 300mA you’ll be fine.