H90: connecting multiple inputs (one stere plus one mono)

Home › Forums › Products › Stompboxes › H90: connecting multiple inputs (one stere plus one mono)

Viewing 4 reply threads
  • Author
    Posts
    • August 11, 2023 at 12:54 pm #173077
      unguitar
      Participant

      Hi,

      I want to connect a stereo and a mono input. Is there such possibility?

      Thank you

    • August 11, 2023 at 1:21 pm #173078
      joecozzi
      Moderator
      Eventide Staff

      Hello,

      Can you describe what you’re trying to do please? Do you want to use two instruments at the same time with the same effects or do you want each instrument to have its own effect?

    • August 11, 2023 at 1:55 pm #173079
      unguitar
      Participant

      Hello,

      I want to have a stereo input and a mono input at the beginning of the signal chain, as they were mixed before being processed.
      They should share the same audio routing then.

       

    • August 14, 2023 at 11:46 am #173126
      joecozzi
      Moderator
      Eventide Staff

      It sounds like you want to connect two instruments and process them both with the same effects. Connect the stereo one to inputs 1&2 and connect the mono input to Input 3. Position Insert 1 before the presets and make sure the Insert Mix is set to 50%. This mixes the signal from the stereo input and the mono input and you can route it to two Presets in either serial or parallel configurations.

    • August 15, 2023 at 11:57 am #173168
      unguitar
      Participant

      Thank you Joe,

      will test this and check if mixing the two sources at 50% is manageable in terms of input volume.

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.