Trying to control H90 with Morningstar MC6 Pro

Tagged: H90, MC6-Pro, MIDI

This topic has 2 replies, 2 voices, and was last updated 1 year, 3 months ago by zambiland.

Viewing 2 reply threads

Author

Posts
- August 11, 2023 at 10:35 pm #173095
  
  zambiland
  Participant
  
  I’ve been setting up the MC6 Pro to control the H90 as well as a Future Impact. It’s working out pretty well, except that when I send a program change to call up a certain program, everything freezes. I can’t find anything anything out of the ordinary in the MC6 Pro, so I’m wondering if there’s something behind the scenes that is causing this.
  
  Also, I have set up foot switches to control overall on/off, effect A on/off and effect B on/off. It works but the LEDs on the H90 only reflect the on/off status with the master on/off. Am I sending the wrong kind of messages to the H90 for the individual effects?
  
  TIA!
- August 11, 2023 at 10:47 pm #173096
  
  joecozzi
  Moderator
  Eventide Staff
  
  zambiland wrote:
  
  It’s working out pretty well, except that when I send a program change to call up a certain program, everything freezes.
  
  How do you have things hooked up? What’s first in the chain? Are you using DIN MIDI?
  
  zambiland wrote:
  
  Also, I have set up foot switches to control overall on/off, effect A on/off and effect B on/off. It works but the LEDs on the H90 only reflect the on/off status with the master on/off. Am I sending the wrong kind of messages to the H90 for the individual effects?
  
  You won’t see the states in SELECT mode. In PERFORM mode, if you have the switches assigned to act/byp the screen tabs will reflect the state by saying either Active or Bypass and the LED buttons will light up or not.
- August 11, 2023 at 11:08 pm #173097
  
  zambiland
  Participant
  
  Thanks for the reply! I have the H90 connected directly by USB. The FI is connected by DIN.
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.