How would the routing work if I wanted to have a wet/dry set up, and also use an insert? For example:
Having a totally dry signal, and then the wet signal using an outboard pedal in between the presets?
I’m thinking:
guitar -> input 1
output 3 -> outboard pedal -> input 3
output 1 -> wet amp
output 4 -> dry amp
The hope here is that for internal routing on the H90, insert 1 is the outboard pedal and can be placed before, between or after both presets being run in series, and insert 2 would be an unprocessed signal that can be taped before the presets or insert 1, to feed a dry signal.
