Why are some factory presets MONO “twin pines”

Home › Forums › Products › Stompboxes › Why are some factory presets MONO “twin pines”

Viewing 5 reply threads
  • Author
    Posts
    • October 16, 2023 at 6:01 pm #174913
      lxm9096
      Participant

      Mono guitar in. Stereo out from 1/2. Some presets from the factory are only coming out of my left speaker. What gives?

    • October 16, 2023 at 6:04 pm #174914
      joecozzi
      Moderator
      Eventide Staff

      Hello,

      What pedal are you working with?

    • October 16, 2023 at 6:08 pm #174916
      joecozzi
      Moderator
      Eventide Staff

      If it’s the H90, are you sure you’re connecting to Input 1 for mono?

    • October 16, 2023 at 8:35 pm #174926
      lxm9096
      Participant

      Hi Joe.

       

      H90

      In 1 out 1/2

    • October 17, 2023 at 5:45 am #174934
      brock
      Participant

      I just checked that Twin Pines Program in your (In 1 / Out 1/2) configuration.  Definitely dry & wet out both speakers.

      All that immediately comes to mind for diagnostic purposes: Check your System – I/O – Jacks to confirm that the H90 is sensing both outputs correctly.

      Or you can try Bypassing the Polyphony Preset, to isolate the Prism Shift Preset.  The way it’s configured, you should be getting the High to Low voices panning right to left (-0.8 Spread).

    • October 17, 2023 at 4:19 pm #174967
      lxm9096
      Participant

      I dont know what happened but no cableing changed and everything is OK today. About a handful of factory presets were mono(L). Something funky with the control app? I truly dont know.

  • Author
    Posts
Viewing 5 reply threads
  • You must be logged in to reply to this topic.