swell or violoning effect with the H90

This topic has 11 replies, 3 voices, and was last updated 10 months, 4 weeks ago by SKYDRIVE98.

Viewing 11 reply threads

Author

Posts
- December 16, 2023 at 7:21 am #176802
  
  SKYDRIVE98
  Participant
  
  Hello everyone,
  
  who could either give an algorithm or advice to create a swell or violoning effect with the H90 .
  
  Thanks
  
  Thierry
- December 18, 2023 at 8:08 am #176815
  
  tbskoglund
  Moderator
  Eventide Staff
  
  There is an UltraTap preset called “Ultraswell” that should do the trick.
  
  You can also check out the new PolySynth algorithm and that can give you some violin swell style effects. Start with the “PWM Strings” preset, turn the attack up for a slower swell, and adjust the filter cutoff/resonance to taste.
- December 18, 2023 at 12:09 pm #176823
  
  SKYDRIVE98
  Participant
  
  Hello ,
  
  I’m going to try the PolySynth algorithm.
  I had tried with the ultra tap without results because there are many parameters.
  Thanks for your help.
  
  Thierry
- December 18, 2023 at 12:43 pm #176824
  brock
  Participant
  PolySynth is a good route to take, but don’t give up on UltraTap (or DynaVerb) just yet. Here’s a little “test” Program I just put together:
  
  https://www.dropbox.com/scl/fi/44ap1ndcafjgve75ac2e9/UltraTap-DynaVerb-Swells.pgm90?rlkey=s1mr133ejndeyxq3rywsi40kb&raw=1
  
  UltraTap & DynaVerb in parallel. You can bypass either one in the Performance Switches, or dial the (P) Hotknob to 0 OR 100.
  
  Everyone’s playing style and system specifics are different. So the critical adjustments will be:
  - The threshold level where the swell will be triggered.
  - The time it will take to swell to full volume.
  - How long it will take to release that for the next swell trigger.
  I mapped the other two HotKnobs to some of those parameters, to make it easier to adjust.
  - (A) HotKnob – UltraTap (Chop) Swell sensitivity & Rise time
  - (B) HotKnob – DynaVerb Threshold level & Release time
  I added a few bells ‘n’ whistles to experiment with (expression pedal swells, HotSwitch options for simulating ensemble swells, using diffusion & reverb).
- December 21, 2023 at 5:02 am #176872
  
  SKYDRIVE98
  Participant
  
  Hello ,
  thank you for your help and advice, it’s really nice of you. I will try to program the preset that you propose with Ultra Tap, namely that I have no volume pedal.
  But I think you’ve understood.
  
  Best regards.
  
  Thierry
- December 21, 2023 at 8:19 am #176874
  
  brock
  Participant
  
  The expression pedal part is just an option, Thierry. The Program is ready to go, with both UltraTap and DynaVerb active. Just consider that you may have to adjust the Swell / Threshold parameters to make the best use of your setup.
- December 22, 2023 at 5:35 am #176883
  
  SKYDRIVE98
  Participant
  
  Hello ,
  
  and thanks again for your feedback, I don’t want to seem like a pain. I’m French and even with the translation, I’m having trouble with all these options in Ultra Tap and Dynaverb.
  I’ve tried to open the links you sent me and I can’t open them.
  I’d really like to see the settings you suggest on the application, but I don’t know if that’s possible.
  
  I won’t take up any more of your time.
  
  Best regards.
  
  Thierry
  
  Translated with DeepL.com (free version)
- December 22, 2023 at 9:15 am #176884
  
  brock
  Participant
  
  I am not sure why you can’t open the link, Thierry. I set it up as a direct download of a Program file, which you can then import into H90 Control.
  
  When I can, I will take some screenshots of the UltraTap and DynaVerb Presets in that Program, so you can input them into the H90 manually. Or perhaps I can list each parameter value for you to reconstruct.
- December 24, 2023 at 5:08 am #176901
  
  SKYDRIVE98
  Participant
  
  Hello ,
  I didn’t understand how to send your file that I couldn’t open.
  At the moment, it’s the end-of-year holidays, so I’ll check after this period to try to download the file in the application.
  In the meantime, thank you for your precious help.
  I wish you a very happy holiday season.
  
  Best wishes.
  
  Thierry
- December 28, 2023 at 10:46 am #176937
  
  brock
  Participant
  
  Preset A – UltraTap Swells
  
  Adjust Chop – Swell and Rise
- December 28, 2023 at 10:49 am #176938
  
  brock
  Participant
  
  Preset B – DynaVerb Swells
  
  Adjust Threshold and Release
- January 2, 2024 at 12:56 pm #177026
  
  SKYDRIVE98
  Participant
  
  Hello ,
  
  thank you very much for the detailed parameters, it works perfectly. Your help has been invaluable.
  This pedal is really interesting and powerful.
  Good music to you.
  
  Best regards.
  
  Thierry
Author

Posts

Viewing 11 reply threads

You must be logged in to reply to this topic.