H90 Two amp routing

Tagged: Two amp configuration using same H90

This topic has 2 replies, 2 voices, and was last updated 10 months ago by BobbyZurek.

Viewing 2 reply threads

Author

Posts
- January 25, 2024 at 5:38 pm #177695
  
  BobbyZurek
  Participant
  
  Hello,
  
  Just ordered an H90.
  
  Im wanting to know if I can run this unit in a two amp configuration.
  
  Amp 1 use FX send and return
  
  Amp 2 use FX send and return
  
  I have a switcher to toggle between amps…
  
  I use two amps for the softer bluesy material and another for the heavier rock.
  
  Would like to eleminate some pedals on my board with this H90.
  
  Is this possible to do, and have fx on each channel the same or different?
  
  Thanks!
- January 26, 2024 at 2:13 pm #177730
  tbskoglund
  Moderator
  Eventide Staff
  Yes, this is possible using Dual Routing.
  - Enable Dual Routing in the System > Global settings on the H90 – https://cdn.eventideaudio.com/manuals/h90/1.7.5/content/system-menu/index.html
  - Connect Amp 1 send to H90 input 1, H90 output 1 to Amp 1 return.
  - Connect Amp 2 send to H90 input 3, H90 output 3 to Amp 2 return.
  - Press the routing button on the H90 to determine which presets are on which path, more information can be found here: https://cdn.eventideaudio.com/manuals/h90/1.7.5/content/edit-modes/routing.html#dual-routing
  Let me know if you have any questions.
- January 26, 2024 at 6:43 pm #177754
  
  BobbyZurek
  Participant
  
  Thank you,
  
  Am I able to have 2 fx on : Amp 1 send to H90 input 1, H90 output 1 to Amp 1 return
  
  And 2 FX on: Amp 2 send to H90 input 3, H90 output 3 to Amp 2 return
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.