H90 Insert Bypass ?

Home › Forums › Products › Stompboxes › H90 Insert Bypass ?

Tagged: 

Viewing 5 reply threads
  • Author
    Posts
    • February 27, 2024 at 11:59 am #178549
      Herr Mosa
      Participant

      What I don’t understand: I have built a preset called Insert1. There is an effect looped into this Ins1. The two algos are “Thru”, nothing else involved.
      Now I would like to activate this Insert with this preset and deactivate it with Bypass. Unfortunately, the Insert1 remains active in Bypass, even if I switch P to Bypass.
      I can’t find a solution; have I misunderstood something or is there a workaround?

    • February 27, 2024 at 12:56 pm #178550
      brock
      Participant

      Which Program Bypass Mode do you have enabled?

      https://cdn.eventideaudio.com/manuals/h90/1.7.5/content/system-menu/global.html

    • February 27, 2024 at 12:58 pm #178551
      Herr Mosa
      Participant

      It’s in DSP Mode (because of Spillover of other Presets) ?

    • February 27, 2024 at 1:09 pm #178553
      tbskoglund
      Moderator
      Eventide Staff

      You need to use AB Only bypass mode if you’d like the inserts to remain active when the Program is bypassed. Tails/Spillover will still work with this setting.

      Note there is also specific Insert active/bypass controls that can be mapped to MIDI/aux switch: https://cdn.eventideaudio.com/manuals/h90/1.7.5/content/appendix/global.html

      You can also bypass either insert using Perform Mode.

      • February 27, 2024 at 2:16 pm #178562
        Herr Mosa
        Participant

        Thanks for that! I have already found Insert On Off in performance mode.
        What I would like, however, would be the option of simply switching the insert on and off with the P on/off. This is about the opposite of what the AB Only function features, if I understand correctly.
        Unfortunately, I only have two aux switches, which are assigned to Programme/Performance Mode and Tuner on Off. So I would be missing a third aux switch and it would be a bit more of a tap dance.

    • February 27, 2024 at 2:50 pm #178566
      joecozzi
      Moderator
      Eventide Staff

      I have my H90 in DSP Bypass mode and I can get it to do what you want, allow the insert audio through when active and shut it off when the H90 is bypassed. Are you sure you’re using IN/OUT 3 to connect your external pedal as an insert?

      • February 27, 2024 at 5:12 pm #178570
        Herr Mosa
        Participant

        Yes it’s io3

        i will load up my Programm perhaps when I’m back on it, ok?

    • February 28, 2024 at 5:38 am #178577
      Herr Mosa
      Participant

      I have to apologize – the device was mistakenly in AB Only Bypass mode. When I activate DSP, I can switch the insert on and off with P.
      Many thanks again for your kind and fast support!

      And let me say thank you so much for this fantastic device! Coming from the H9, this processor is a real asset to me.

      • February 28, 2024 at 9:39 am #178580
        tbskoglund
        Moderator
        Eventide Staff

        Glad to hear you got it working.

  • Author
    Posts
Viewing 5 reply threads
  • You must be logged in to reply to this topic.