H90 – Always on option and user routing

Home Forums Products Stompboxes H90 – Always on option and user routing

Viewing 1 reply thread
  • Author
    Posts
    • #182535
      Blackstrat83
      Participant

      Good evening to all our fellow eventide community!

      I have a couple of questions that maybe someone can help out!

       

      1) I have my main list of effects on User 2 but I want to start toying with the some delays and reverbs in Fx loop of my amp. Is it possible to set a new user (User 3) but that one with different mode? (User 2 in insert mode and User 3 in dual mode). This would be in order to use a playlist in my non fx loop amp and the other for fx loop amps. Is that possible or all this options affect globaly?

      2) One friend told me that there’s the possiblity of having an “always on” option regardless of the program. For example: If I want to have an slapback delay on all the time. Been searching for this but don’t know if my friend is really incorrect.

       

      Thanks in advance!

      Best,

      BSt

    • #182537
      tbskoglund
      Moderator
      Eventide Staff

      Hello,

      No it is not possible to have 1 insert list and one dual mode list in the same group of lists. When you switch the pedal from insert mode to dual mode, it will switch the available lists you can use. When you want to use dual mode, you’ll need to switch the pedal into dual mode in the system settings, and you will now have a different selection of user 1-4 lists to choose from. The lists are organized this way so that you don’t mistakenly make incorrect routings in your setup that could cause feedback loops, etc.

      There is no “always on” option for presets. You can make your list so that every Program has a slap back delay, but you will need to create each Program individually to do that.

      Let me know if you have any other questions.

Viewing 1 reply thread
  • You must be logged in to reply to this topic.