Sending Clock from Digitakt to Misha

Home › Forums › Products › Eurorack Modules › Sending Clock from Digitakt to Misha

Viewing 1 reply thread
  • Author
    Posts
    • June 9, 2024 at 7:43 pm #183144
      perhapsicanhelp
      Participant

      Hello & thanks ahead of time.

       

      I’m sequencing Plaits with Misha and would like to send clock from my Digitakt to Misha so that Misha starts and stop as the DT does.

      I have Midi set to send on my DT & on the Misha have enabled the following settings:

       

      Ext Clock Source: Midi Active Sense

      Ext Clock PPQ: 24

       

      I’m uploading a photo to show how Plaits is connected to Misha.

      I am using a type A adapater.

      I have tested two different midi cables.

      I have made sure I can hear the sound of Plaits coming through the DT.

       

      All I would like to do is send start and stop messages to Misha from the DT.

       

      Thanks!

    • June 13, 2024 at 9:21 am #183252
      tbskoglund
      Moderator
      Eventide Staff

      Hello,

      If you press the shift buttons on Misha until you see the clock settings, you can use the Key knob to change the clock source to MIDI, and this should make Misha follow the MIDI clock and start/stop commands from your sequencer.

      Let me know if that works.

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.