H90 level issues

Home › Forums › Products › Stompboxes › H90 level issues

Tagged: 

Viewing 3 reply threads
  • Author
    Posts
    • June 9, 2024 at 10:11 pm #183145
      maxolla
      Participant

      I’m using the H90 in the effects loop of my Fender super sonic and when I engage the effect there is an approximate 9db boost in signal.  When I depress and disengage the the level returns to normal.  I decreased the input and output level on the particular algo and it worked fine.  I’m wondering if there is a global setting for this mismatched impedance issue.

       

      thanks,

      Max

    • June 9, 2024 at 11:54 pm #183146
      shawcunningham
      Participant

      Have you checked to see if your H90 inputs / outputs are set to line level or instrument level?   Are those mismatched?

    • June 26, 2024 at 5:28 am #183462
      packedpolo
      Participant
      maxolla wrote:

      @ flappy bird

      Have you checked to see if your H90 inputs / outputs are set to line level or instrument level?   Are those mismatched?

      Make sure your H90 input/output is set to line level or device level. If those don’t match check again.

    • July 9, 2024 at 2:16 am #183647
      mjahoger
      Participant

      Also, please be aware that there is a volume bump when you run effects in parallel and have either one disengaged.

  • Author
    Posts
Viewing 3 reply threads
  • You must be logged in to reply to this topic.