H90 connection to switcher- gigrig g3 atom

Home › Forums › Products › Stompboxes › H90 connection to switcher- gigrig g3 atom

Viewing 1 reply thread
  • Author
    Posts
    • June 16, 2024 at 6:50 pm #183290
      jtdoherty
      Participant

      <p style=”text-align: left;”>Guys, I was struggling to connect the H20 up to switcher properly. I want to connect it in dual routing mode and have connected io 1/1&2 to loop 1 and 3/3&4 into loop 6 of the Atom G3. I’m getting a small volume drop just enough to take the edge off the amp when the HD is in the Signal chain. I have lip and lick with the drives in between. No matter which way I organise the presets in parallel or in series and on the either path I still get the problem. I’m wondering if you could help.</p>

    • June 17, 2024 at 10:44 am #183291
      joecozzi
      Moderator
      Eventide Staff
      jtdoherty wrote:

      I’m getting a small volume drop just enough to take the edge off the amp when the HD is in the Signal chain.

      A few questions to determine what could be causing the change in volume:
      -Are both H90 paths being routed to the front of the amp?
      -Is either path being directed to the amp’s effects loop?
      -What other effects are in the signal chain along with the H90?

      jtdoherty wrote:

      I have lip and lick with the drives in between.

      I’m not sure what you are saying here. Are you saying you have drives in between both H90 paths?

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.