1 mono output with, 1 without FX?

This topic has 1 reply, 2 voices, and was last updated 3 months, 3 weeks ago by brock.

Viewing 1 reply thread

Author

Posts
- December 27, 2024 at 9:33 pm #187224
  keenast
  Participant
  Out of the H90 – Is that somehow possible?
  Besides splitting the signal beforehand and then sing 2 separate inputs of a mixer or something..
  
  I also have a Missing Link on my hand, would that make it easier?
- December 28, 2024 at 9:48 am #187225
  brock
  Participant
  There are other possible configurations options, but this may be the easiest way to get there:
  
  https://cdn.eventideaudio.com/manuals/h90/1.9.7/content/setup/wet-dry.html
  
  Just below [3.4.1], you’ll see how the Insert is tapped before either of the H90 effects. Input 1 feeds everything. Out 3 is used as a send for “without” (no return needed to In 3). Out 1 will be your “with”.
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.