H90 – Mono Out – Mono In Insert and Mono Out – Stereo In Insert

Home › Forums › Products › Stompboxes › H90 – Mono Out – Mono In Insert and Mono Out – Stereo In Insert

Viewing 1 reply thread
  • Author
    Posts
    • January 3, 2025 at 6:06 pm #187442
      CRLCC
      Participant

        My plan was to put two pedals as inserts into my H90. A simple overdrive, and the Chase Bliss Onward. What I love about the onward is the MISO functionality, which turns a mono signal into a stereo one. So my plan was the following setup.

         

        In1 – Guitar

         

        Out 1 – Overdrive

        In 2 – Overdrive Return

        Out 2 – Chase Bliss Onward

        In 3/4 – Chase Bliss Onward Return

         

        Out 3/4 – External Reverb

         

        However this is not possible is it?

         

      • January 3, 2025 at 6:17 pm #187445
        joecozzi
        Moderator
        Eventide Staff

          The correct way to use pedals in the H90 inserts would be the following:

          Out 3 into external pedal, out that pedal back into the H90 on In 3. Same thing for the second insert using I/O 4. This way those inserts could be moved around the H90’s signal flow at will.

          Because the H90 can only have two mono or one stereo insert, there would be no way to send a mono signal and return a stereo signal for MISO functionality. You have to decide to either run the Onward in mono or stereo.

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.