H90 Preset Bypass UI

Home › Forums › Products › Stompboxes › H90 Preset Bypass UI

Tagged: 

Viewing 2 reply threads
  • Author
    Posts
    • January 10, 2025 at 3:01 am #187617
      BasstiR
      Participant

      Good Morning and sorry for my bad English,

      After months of use and complete MIDI implementation for presets and other stuff from my MC6Pro and several live use cases I have the following MAIN und partially deal breaking concern:

      I find the UI to be very confusing for switching presets on/off. When I engage a program with 2 presets, lets say there is a delay and and a reverb in it, how can I turn one of these two effects on or off? The answer would be in the perform mode. And that is where the problem begins for me:

      I can’t see in this mode which preset is on A or B. Therefore I can’t see what I am supposed to bypass / engage. I got it somehow fixed with an external MIDI device (MC6pro). I go to the select mode, where I can clearly see which presets are in there and I can see what I am turning on or off with my Switcher externally. But I don’t always have room for such extra devices

      The Question now in short:

      How can I turn on / off any presets (A and or B) with the device itself while seeing what I am doing (not possible in Perform mode)?

       

      Thanks Sebastian

    • January 10, 2025 at 11:28 am #187625
      tbskoglund
      Keymaster
      Eventide Staff

      Hello,

      You can assign your MIDI controller to the active/bypass states of Presets A/B by making a global mapping. For example, you can make it so CC1 will always toggle the active/bypass of Preset A, and CC2 always toggles the active/bypass of Preset B.

      Information about global MIDI mapping on the pedal or H90 Control can be found in the manual below:

      https://cdn.eventideaudio.com/manuals/h90/1.9.7/content/system-menu/midi.html

      https://cdn.eventideaudio.com/manuals/h90/1.9.7/content/h90-control/system.html

      If you update your pedal to the latest software, you should see a popup for the active/bypass state when you are in Select Mode.

      Let me know if that helps.

    • January 10, 2025 at 12:34 pm #187628
      BasstiR
      Participant

      I already did that. It works. I wanted to mention it. But how can this be fixed onboard?

      I saw the update for the perform mode, but it only shows the preset when you change its state. But nor regularly so that I can’t see before which algorithm I bypass by pressing the switch.

  • Author
    Posts
Viewing 2 reply threads
  • You must be logged in to reply to this topic.