Rose MIDI Implementation

• TRS MIDI input
• USB MIDI input/output
• Continuous control (CC) messages received for real-time control.
• Program Change
• System Exclusive (SYSEX) dump of presets and entire system state

Release of Japan version

The Rose pedal has 5 banks of presets to choose from, each bank containing 5 presets for a total of 25 presets.

Loading Presets Using the Footswitches

To Load a Preset from the currently selected Bank:

• Press ACTIVE + HOTSWITCH (Footswitch LEDs = Orange) 
• Tap HOTSWITCH to select Preset Slot indicated by the PRESET ladder
• Press ACTIVE to load Preset

To Change Preset Bank:

• Press ACTIVE + HOTSWITCH (Footswitch LEDs = Orange)
• Hold HOTSWITCH alone until SHAPE LED is lit.
• Tap HOTSWITCH to select Preset Bank indicated by the SHAPE ladder

Loading Presets Using the Buttons

To Load a Preset from the currently selected Bank:

• Momentarily press PRESET (PRESET + SHAPE LEDs are blinking)
• Press PRESET Button to select Preset Slot indicated on the PRESET ladder
• Preset loads when PRESET + SHAPE LEDs stop blinking

To Change Preset Bank & Load Preset:

• Momentarily press PRESET (PRESET + SHAPE LEDs are blinking)
• Press SHAPE Button to select Preset Bank indicated by the SHAPE ladder
• Press PRESET to select a Preset Slot indicated on the PRESET ladder
• Preset loads when PRESET + SHAPE stop blinking

Saving Presets 

• Press & Hold PRESET Button until PRESET + SHAPE LEDs are blinking
• Press SHAPE Button to select target Preset Bank
• Press PRESET to select target Preset Slot
• Hold PRESET Button until PRESET & SHAPE LED flashes rapidly
• Preset is now saved in selected Bank and Slot

MIDI Clock

• Hold ACTIVE + PHI until all LEDs are on
• Press PHI to enable MIDI clock (bottom most Shape ladder LED lit) or disable MIDI clock (all SHAPE ladder LEDs off)
• Press ACTIVE or HOTSWITCH to exit

Bypass Mode/Kill-dry Mode

• Hold ACTIVE + PHI until all LEDs are on
• Press PRESET to toggle different Bypass Modes (Buffer, Relay or Input Kill)
• Each Bypass Mode can stand alone or be paired with Kill-dry Mode
• Kill-dry is indicated by the bottom LED on the PRESET ladder
• Press ACTIVE or HOTSWITCH to exit

Hotswitch/Tap Tempo Divisions

• Hold SHAPE Button until SHAPE + PRESET are blinking
• Press SHAPE Button to assign HOTSWITCH function to Tap Tempo (first LED)
• Press PRESET Button to select tap tempo/tap LFO divisions
• Available divisions are ¼ (top LED of Preset Ladder lit), ?, dotted ? and triplet
• Press ACTIVE or HOTSWITCH to exit

AUX Switch

• Hold HOTSWITCH + DELTA until PRESET and SHAPE are blinking
• Press SHAPE Button to cycle through Tap, Inf Rpt, Mod Hold, Mod Rst, A/B, PHI, DELTA, Bypass, Preset Load, Decrement Preset (Hotswitch LED green), Increment Preset (Hotswitch LED red) and Unassigned
• To assign AUX to BYPASS press SHAPE until ACTIVE LED is red
• To assign AUX to Preset Load press SHAPE until ACTIVE LED is yellow
• Press ACTIVE or HOTSWITCH to exit

Envelope Detune Effect

• Press SHAPE Button to select Envelope Modulation on SHAPE ladder
• Set RATE knob fully counterclockwise
• Change DEPTH value using knob, Exp Pdl or MIDI

Known Issues

Please note that this update is still in beta and there are several known bugs:

• Sending MIDI program changes to presets outside the first bank can cause issues with the saved presets
• Tap tempo subdivision changes don’t take effect when set until tempo is tapped in again.

Software Download

To download the latest software, you will need to connect your device using a mini USB cable and download the Eventide Direct Updater.