TimeFactor
Downloads
2.0.1
- Added support for Riptide pedal
1.9.0
- Fixed issue where Rose was only communicating on MIDI channel 1
- Added revert (undo) to dot9 system settings editor
1.8.0
- Update settings labels for expression pedal MIDI options to match quick reference guides.
1.7.0
- Removes auto-update button (lightening bolt), auto-update is always active. (Rose editor issue)
- When a preset is imported from a file it is sent to the device immediately for auditioning. (Rose editor issue)
1.6.0
- Updates for MicroPitch Delay Pedal
- Adds support for the Blackhole pedal
- App can be resized
- This release supports and requires Rose 3.15 firmware
- This release supports Rose 3.11 firmware
1.2.0
- Added support for EuroDDL firmware updates
- Minor UI fix for Rose Editor on Windows
2.0.1
- Support for Riptide pedal
1.9.2
- Update Factor pedals that report serial number as -INVALID- in update mode
1.9.0
- Fixed issue where Rose was only communicating on MIDI channel 1
- Added revert (undo) to dot9 system settings editor
1.8.0
- Update settings labels for expression pedal MIDI options to match quick reference guides
1.7.0
- Removes auto-update button (lightening bolt), auto-update is always active. (Rose editor issue)
- When a preset is imported from a file it is sent to the device immediately for auditioning. (Rose editor issue)
1.6.0
- Updates for MicroPitch Delay Pedal
- Adds support for the Blackhole pedal
- App can be resized
- This release supports and requires Rose 3.15 firmware
- This release supports Rose 3.11 firmware
1.2.1
- Update to fix issue with downloading updates on MacOS Catalina
1.2.0
- Added support for EuroDDL firmware updates
- Minor UI fix for Rose Editor on Windows
Eventide Direct Updater v2.1.0
- Bug fixes and UI improvements
- Bug fixes and minor improvements
- Added support for Rose devices
- This build now pulls the stompbox updates from the cloud
Eventide Direct Updater v2.1.0
- Bug fixes and UI improvements
- Bug fixes and minor improvements
- Added support for Rose devices
- This build now pulls the stompbox updates from the cloud
FactorLib is an application for either Windows or OSX allowing the user to manipulate presets from an Eventide stompbox. It may be thought of as a Library Manager and can be used to archive, delete or re-order presets, as well as uploading or downloading them via MIDI or USB.
FactorLib is an application for either Windows or OSX allowing the user to manipulate presets from an Eventide stompbox. It may be thought of as a Library Manager and can be used to archive, delete or re-order presets, as well as uploading or downloading them via MIDI or USB.
INSTRUCTIONS FOR USING H9 CONTROL
1. Download & Update H9 Control
2. Update the Software on your H9
- Connect your H9 to H9 Control (via Bluetooth or USB Cable)
- Start H9 Control
- Click the Pedal icon at the bottom of the screen
- Click "Update Stompbox's Software"
- Select the latest release
- Click the "Install Software" button
- Do not disconnect or power down during the update. The update may take up to 12 minutes.
3. New Algorithm
For H9 Max Owners
- In H9 Control, click on the Settings icon at the bottom of the screen
- Click the "Restore Purchases" button
- Click "Restore Purchases"
For H9 & H9 Core Owners
- In H9 Control, click on the Store icon at the bottom of the screen
- Click the H9 icon
- Select the Algorithm
- click Try to audition the algorithm, or
- click Buy to purchase
Troubleshooting
If you run into any problems with the updates, you can try the process again, check our support forums or send a message to support.H9 Control v.4.0.1
- Refreshed UI with look-and-feel improvements and bug fixes.
- Removed the in-app algorithm store.
H9 Control v.3.7.4
- Fixed renaming problem in the Preset Lists page
- Updated a few factory presets
H9 Control v.3.7.0
- Added a new algorithm TriceraChorus, a classic Tri-Chorus + MicroPitch detuning effect.
- Bug fixes and user experience improvements
H9 Control v.3.6.1
- Added a new algorithm Harmadillo, a flexible harmonic tremolo effect, and a customized control UI (only available on tablets)
- Bug fixes and user experience improvements
H9 Control v.3.5.4
-
Added a feature to view more presets in the preset list screen on desktop and tablet devices
-
Added support for connections to multiple Eventide stompboxes via MIDI on iOS devices
-
Bug fixes and user experience improvements
H9 Control v.3.5.2
- Fix for a potential application crash
H9 Control v.3.5.0
- Added the NEW algorithm "HotSawz"
- Updated GUI for the control screen
- Improved the preset list screen and its "Drag & Drop" feature
- Added Chinese and Japanese translations for all algorithm descriptions
- Bug fixes and user experience improvements
H9 Control v.2.9.3
- Fixed a bug affecting the importing of h9z archives
- Improved the Chinese translations
H9 Control v.2.9.0
- Added a custom UI for the Harpeggiator algorithm
- Added Chinese language translations for the text in the app
- Added a function for duplicating preset lists
H9 Control v.2.8.1
This release contains the new PitchFuzz algorithm. PitchFuzz is a multi-effects algorithm combining Fuzz, three Pitch Shifters, and two Delays into one, easy to use effect. The Fuzz gets its inspiration from classic analog fuzz pedals as well as Eventide's own CrushStation and Sculpt algorithms.H9 Control v.2.7.8
- Fixed a crashing problem in the MIDI program change mappings screen
- Added new audio samples
- Improved the Japanese translations of the text
H9 Control v.2.7.4
This version contains the new Sculpt algorithm: a multi-band distortion with envelope follower control filters which allows you to carve out your own sound with a dynamic variable blend of hi and lo band distortion channels.H9 Control v.2.6.0
- This version introduces the new algorithm, SpaceTime, a multi-effects algorithm combining Modulation, two Delays and Reverb into one easy to use effect
- The Harpeggiator was updated with additional graphics illustrating the active pitch and rhythmic patterns
- New systems settings were added to prevent iOS devices from sleeping while H9 Control is open and to allow sorting of the algorithms in the algorithm screen
- And bug fixes were made that affected the renaming of H9 devices and the reordering of presets in a preset list with TimeFactor devices
INSTRUCTIONS FOR USING H9 CONTROL
1. Download & Update H9 Control
2. Update the Software on your H9
- Connect your H9 to H9 Control (via Bluetooth or USB Cable)
- Start H9 Control
- Click the Pedal icon at the bottom of the screen
- Click "Update Stompbox's Software"
- Select the latest release
- Click the "Install Software" button
- Do not disconnect or power down during the update. The update may take up to 12 minutes.
3. New Algorithm
For H9 Max Owners
- In H9 Control, click on the Settings icon at the bottom of the screen
- Click the "Restore Purchases" button
- Click "Restore Purchases"
For H9 & H9 Core Owners
- In H9 Control, click on the Store icon at the bottom of the screen
- Click the H9 icon
- Select the Algorithm
- click Try to audition the algorithm, or
- click Buy to purchase
Troubleshooting
If you run into any problems with the updates, you can try the process again, check our support forums or send a message to support.H9 Control v.4.0.1
- Refreshed UI with look-and-feel improvements and bug fixes.
- Removed the in-app algorithm store.
H9 Control v.3.7.4
- Fixed renaming problem in the Preset Lists page
- Updated a few factory presets
H9 Control v.3.7.0
- Added a new algorithm TriceraChorus, a classic Tri-Chorus + MicroPitch detuning effect.
- Bug fixes and user experience improvements
H9 Control v.3.6.1
- Added a new algorithm Harmadillo, a flexible harmonic tremolo effect, and a customized control UI (only available on tablets)
- Bug fixes and user experience improvements
H9 Control v.3.5.4
-
Added a feature to view more presets in the preset list screen on desktop and tablet devices
-
Added support for connections to multiple Eventide stompboxes via MIDI on iOS devices
-
Bug fixes and user experience improvements
H9 Control v.3.5.3
- Added an option for all Windows users to purchase algorithms using a standalone browser instead of H9 Control's in app browser.
H9 Control v.3.5.0
- Added the NEW algorithm "HotSawz"
- Updated GUI for the control screen
- Improved the preset list screen and its "Drag & Drop" feature
- Added Chinese and Japanese translations for all algorithm descriptions
- Bug fixes and user experience improvements
H9 Control v.2.9.3
- Fixed a bug affecting the importing of h9z archives
- Improved the Chinese translations
H9 Control v.2.9.0
- Added a custom UI for the Harpeggiator algorithm
- Added Chinese language translations for the text in the app
- Added a function for duplicating preset lists
H9 Control v.2.8.1
This release contains the new PitchFuzz algorithm. PitchFuzz is a multi-effects algorithm combining Fuzz, three Pitch Shifters, and two Delays into one, easy to use effect. The Fuzz gets its inspiration from classic analog fuzz pedals as well as Eventide's own CrushStation and Sculpt algorithms.H9 Control v.2.7.10
Fixed crash issueH9 Control v.2.7.9
- Added a crash dump submission system
- Fixed a bug where preset lists containing presets with characters that are illegal on Windows file systems could not be imported on Windows
H9 Control v.2.7.8
- Fixed a crashing problem in the MIDI program change mappings screen
- Added new audio samples
- Improved the Japanese translations of the text
H9 Control v.2.7.4
This version contains the new Sculpt algorithm: a multi-band distortion with envelope follower control filters which allows you to carve out your own sound with a dynamic variable blend of hi and lo band distortion channels.H9 Control v.2.6.0
- This version introduces the new algorithm, SpaceTime, a multi-effects algorithm combining Modulation, two Delays and Reverb into one easy to use effect
- The Harpeggiator was updated with additional graphics illustrating the active pitch and rhythmic patterns
- New systems settings were added to prevent iOS devices from sleeping while H9 Control is open and to allow sorting of the algorithms in the algorithm screen
- And bug fixes were made that affected the renaming of H9 devices and the reordering of presets in a preset list with TimeFactor devices
A comprehensive listing of all of the TimeFactor's factory presets and their settings.
Documentation
H9 Control Manual
English
The Looper provides 12 seconds of mono recording at full audio quality and up to 48 seconds at reduced audio quality. Salient features are: loop recording in seconds or beats, variable speed scrubbing during playback and dubbing (including reverse playback and dubbing), seamless dubbing, realtime adjustment of the loop starting point and loop length, and fullfeatured MIDICLK sync.
If your Eventide Stompbox is connected to a stereo source, the inputs are automatically summed and the sum is the Looper's input. The Looper's output drives both outputs identically.
Since the Looper runs on both TimeFactor and H9, the Looper footswitch operations are first discussed separately, for the Timefactor in Timefactor Looper Footswitch Operation, and for the H9 in H9 Looper Footswitch Operation.
Next, the features common to both H9 and Timefactor are discussed: Looper Control Parameters, Tempo Mode and MIDI Clock Sync, and MIDI CC and Aux Switch Designations.
New Looper User Guide
English
Dave Kilminsters's Presets from Roger Waters: the Wall Live!
Quick Reference Guide
Version A | English
TimeFactor User Guide (JPN)
Version F | Japanese
TimeFactor Owner's Manual
Version F | English
TimeFactor Owner's Manual (DE)
Version D | German
TimeFactor Owner's Manual (ES)
Version D | Spanish
TimeFactor Owner's Manual (FR)
Version D | French
TimeFactor Owner's Manual (IT)
Version D | Italian
TimeFactor Presets Manual
Version A | English
