Assign a parameter to the foot pedal

Home › Forums › Products › Rackmount › Assign a parameter to the foot pedal

  • This topic is empty.
Viewing 1 reply thread
  • Author
    Posts
    • August 20, 2009 at 9:55 am #106392
      whawalter
      Member

      Hi,

      I'm a new user of Eventide Eclipse.

      I would like to use the foot pedal to control the different parameters of each preset.

      I checked the pedal in the page SETUP/PEDALS ,as described at pag.47 of the manual, and it works.

      Now I don't know how to assign a parameter to the pedal. I can't find useful info on the manual about this subject.

      Can you help me?

      Thanks,

      Walter

      IT

    • August 20, 2009 at 12:46 pm #118960
      IDeangelis
      Member

      Hi Walter

      Wink

      welcome to the Eventide forum!

      The info you need is available in the section "Modulating Parameters Via the modulation block: LFO, ADSR, Envelope, MIDI, Pedals and More", starting from page 40 of the manual.

      Page 45 shows how the EXTERNALS can and should be used with MIDI controllers or pedals/switches.

      all the best

      I

  • Author
    Posts
Viewing 1 reply thread
  • You must be logged in to reply to this topic.