H90 and HX Stomp power supply

[santisandoval89]

Hi, I would as for some tips on connecting an H90 and an HX Stomp with the same power supply. Since the voltage and amount of current is so high on both units I don’t know if there is a lightweight (AND AFFORDABLE) alternative than using both bulky and heavy original adapters. Maybe something like an mxr, ojai, one spot? and if so, would it be neccesary to use some current doubler cable or something like that?

Would appreciate some help! thanks in advance

[joecozzi]

Eventide PowerMini: https://www.eventideaudio.com/pedals/powermini/

You would be able to power the H90 with one outlet running at 12V and the HX stomp with two outlets at 9V using a combination of these two cables:

Flex 8800: https://store.eventideaudio.com/collections/cables/products/8800-parallel-adapter-flex-10cm-sand-grey

Flex Type 3: https://store.eventideaudio.com/collections/cables/products/3050-flex-type-3-5-5-2-5mm-dc-plug-center-negative-angled-l-shape-50-cm

[santisandoval89]

Thanks for your help!

 

[zambiland]

I think a TrueTone CS12 should be able to handle it. It’s bigger and heavier than the PowerMini, but very robust and can mount under a pedalboard.

[Author]

Posts