Home › Forums › Products › Stompboxes › Harmonizer
- This topic is empty.
-
AuthorPosts
-
-
January 21, 2019 at 2:58 am #115164peaveyfanMember
Listen to Your Grace Is Enough by Chris Tonkin. The song is in A, they use a Capo on the 2nd fret and play it in a G pattern. I want to play it without a Capo. If you listen to the beginning guitar riff, to play without a capo, you would play an open G string on top of the riff played on the B. But again, that would put the song in G. Is there a way to just play 2 frets higher, on the B, and have the harmonizer resemble the G in A without harmonizing each note?
I hope this makes sense.
Thank you.
-
January 21, 2019 at 5:57 am #151045peaveyfan wrote:Listen to Your Grace Is Enough by Chris Tonkin. The song is in A, they use a Capo on the 2nd fret and play it in a G pattern. I want to play it without a Capo. If you listen to the beginning guitar riff, to play without a capo, you would play an open G string on top of the riff played on the B. But again, that would put the song in G. Is there a way to just play 2 frets higher, on the B, and have the harmonizer resemble the G in A without harmonizing each note? I hope this makes sense. Thank you.
Well, H9 is not that smart to just shift one string and keep others unchanged. However, you can use PitchFlex or H910/949 algorithm to shift all strings a whole tone and just play the riff on the B as the way you played before with the capo. Don't forget to turn the MIX knob to 100 so there won't be any dry sound.
-
January 22, 2019 at 10:44 pm #151054peaveyfanMember
Eventide, if you could, please give me an example setting. I’m not to famliar with the pedal yet. Than k you.
-
January 23, 2019 at 1:37 am #151055peaveyfan wrote:
Eventide, if you could, please give me an example setting. I'm not to famliar with the pedal yet. Than k you.
You may just drag this preset into H9 Control on your PC/Mac, or "open it in H9 Control" on your phone.
-
-
January 23, 2019 at 9:43 pm #151059peaveyfanMember
I’m dragging it over…it’s not doing anything.
-
January 24, 2019 at 3:45 am #151062peaveyfan wrote:
I'm dragging it over…it's not doing anything.
Are you using a Mac or PC?
You can also try to go to the Preset screen, click the "More" button on the top right corner, and click "Import Preset" button from the dropdown list.
-
-
-
AuthorPosts
- You must be logged in to reply to this topic.