MIDI PC message selects preset, but in bypass

Home › Forums › Products › Stompboxes › MIDI PC message selects preset, but in bypass

  • This topic is empty.
Viewing 4 reply threads
  • Author
    Posts
    • August 1, 2012 at 3:06 am #108989
      ctc
      Member

      When sending pc messages with my midi foot controller to the TimeFactor, the TF changes to the correct preset, but then it always changes to bypass mode. So I configured ACT in the RCV CTL settings to be CC 23, and added a command to my foot controller to send cc 23 with a value of 127 after each PC message sent, the same problem occurs. Can anyone explain this behavior? How will I keep the TimeFactor in active mode ? When doing this

    • August 1, 2012 at 3:27 pm #123691
      underwood
      Member

      Hello,

      didn't have a solution but I have the same problem. The MF acts different, it always goes in active mode!

    • August 1, 2012 at 5:37 pm #123692
      MarcoR
      Participant

      Sending a PC message selects the preset in the state it was saved in; so if you saved it in bypass, it is recalled in bypass. At least that's how it works for me.

    • August 1, 2012 at 6:47 pm #123694
      underwood
      Member

      Didn't know that. Have to try it.

      What FW Version have you installed?

    • August 2, 2012 at 1:23 pm #134741
      MarcoR
      Participant

      The latest 3.5.0[4].

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.